MQ135 Air Quality Gas Sensor
Alias: :MQ135、air quality sensor、gas sensor、CO2 sensor、harmful gas detection、air monitoring、gas-sensitive sensor、environmental pollution monitoring

Specifications
TypeAir quality gas sensor (broad-spectrum gas sensor)
Detected GasesCO₂, ammonia (NH₃), nitrogen oxides (NOₓ), benzene, alcohol, smoke, formaldehyde, and other harmful gases
Sensor PrincipleTin dioxide (SnO₂) semiconductor gas-sensitive material with heating resistor
Supply Voltage5V DC (heater rated) / 3.3V usable but with reduced sensitivity
Load ResistanceAdjustable (RL) for calibrating output sensitivity
Analog Output0 ~ 5V (same as VCC), max 3.3V when powered at 3.3V
Digital OutputTTL level (D0), threshold adjustable via onboard potentiometer
Warm-up Time24 ~ 48 hours (full accuracy) / ~3 minutes (trend reference)
Operating Temperature0 ~ 50°C
Operating Humidity≤ 95% RH (non-condensing)
Pin Count4-pin (VCC, GND, A0, D0)
Typical ApplicationsAir quality monitors, gas leak alarms, smart ventilation control, indoor environment detection
NotesThe MQ135 is a broad-spectrum sensor that cannot distinguish between specific gas types; readings are affected by temperature and humidity; long warm-up time required (24+ hours); suitable for relative value judgment and trend monitoring, not for accurate ppm concentration measurement. At 3.3V supply, heater power is approximately 44% of rated value, reducing sensitivity.